Contents
About this Guide...................................................................4
FCC Statement.....................................................................4
WEEE Notice........................................................................4
CE Regulatory Notice...........................................................5
Notes on Installation.............................................................5
Caution.................................................................................5
1
2
Introduction.................................................................... 6
1.1
1.2
1.3
Features ....................................................................6
Package Contents.....................................................6
Product Overview......................................................7
Getting Started .............................................................. 8
Inserting the Memory Card........................................8
Installing in Vehicles..................................................9
2.1
2.2
2.2.1
2.2.2
Mount to Windshield .............................. 9
Adjust Device Position......................... 10
2.3
2.4
Connecting to Power...............................................11
Powering the Device On / Off..................................12
2.4.1
2.4.2
Auto Power On/Off............................... 12
Manual Power On/Off .......................... 12
1
5
6
7
Installing the Software ................................................. 25
Editing software........................................................... 26
Specifications .............................................................. 27
3
About this Guide
The content in this document is for information purpose and is subject to change without
prior notice. We made every effort to ensure that this User Guide is accurate and complete.
However, no liability is assumed for any errors and omissions that may have occurred.
The manufacturer reserves the right to change the technical specifications without prior
notice.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in
private households in the European Union
This symbol on the product or on the packaging indicates that this can not be
disposed of as a household waste. You must dispose of your waste equipment
and/or battery by handling it over to the applicable take-back scheme for the
recycling of electrical and electronic equipment and/or battery. For more
information about recycling of this equipment and/or battery, please contact
your city office, the shop where you purchased the equipment or your
household waste disposal service. The recycling of materials will help to
conserve natural resources and ensure that it is recycled in a manner that
protects human health and environment.
4
CE Regulatory Notice
This equipment complies with the requirements set out in the Council Directives on the
Approximation of the Laws of the Member States relating Electromagnetic Compatibility
(2004/108/EC); the Low Voltage Directive (2006/95/EC); the Restriction of The Use of
Certain Hazardous Substances in Electrical And Electronic Equipment Directive
(2002/95/EC), Turkish EEE Directive; the Commission Regulation (EC) No 1275/2008
implementing Directive 2005/32/EC of the European Parliament and of the Council with
regard to eco-design requirements for standby and off mode electric power consumption of
electrical and electronic household and office equipment, and the Directive 2009/125/EC of
the European parliament and of the council establishing a framework for the setting of
eco-design requirements for energy-related products.
Notes on Installation
1. Install the device near the rear-view mirror to obtain the best
open-field view.
2. Make sure that the lens is within the wiping range of the windscreen
wiper to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left
on the lens and will result in unclear videos or snapshots. Clean the
lens on a regular basis.
4. Do not install the device on a tinted window. Doing so may damage
the tint film.
5. Make sure that the installation position is not hindered by the tinted
window.
MODEL: SP5
Li-Polymer 3.7V 470mAh 1.7Wh
Be sure to use only the supplied battery and charger. The use of any
other type of battery or charger may damage the device and void your
warranty.
Caution
∑
∑
∑
∑
∑
Use the authorized charger only.
Never disassemble by yourself.
Never short-circuit the battery.
Dispose of the battery properly.
Exposing the battery to open flames can cause explosion.
WANSGLORY CO., LTD.
5
1 Introduction
Thank you for purchasing this advanced Car Recorder. This device
is specifically designed for real time video and audio recording
when driving.
1.1 Features
•
•
•
•
•
•
•
Full HD camera (1920x1080 @ 30fps)
2.4” LCD color screen
Wide angle lens
High power LED for low light environments
Motion detection
Automatic Emergency recording for collision detection
Supports Micro SDHC up to 32GB
1.2 Package Contents
The package contains the following items. In case there is any
missing or damaged item, contact your dealer immediately.
Car Recorder
Bracket
CD-ROM
Car adapter
Quick start guide
Video cable
USB cable
6
1.3 Product Overview
Front View
Rear View
Top and Bottom Views
10
1
2
3
11
12
Side (Left and Right) Views
9
13
6
4
7
5
8
16
14
15
No.
1
Item
Microphone
No.
9
Item
Back Button (
LCD Panel
Up Button (
)
2
Bracket Socket
Bracket Socket
Memory Card Slot
Power Button
10
11
12
13
14
15
16
3
)
4
Down Button (
Enter Button (
)
5
)
6
USB Connector
HDMI Connector
Reset Button
Wide Angle Lens
Speaker
7
8
LED Light
Note: To operate the device, press the corresponding buttons (9, 11, 12, 13) according to
guide icons shown the screen.
7
2 Getting Started
2.1 Inserting the Memory Card
Insert the memory card with the gold contacts facing the back of the
device. Push the memory card until it clicks into place.
To remove the memory card
Push to eject the memory card out of the slot.
Note: Do not remove or insert the memory card when the device is turned on. This may
damage the memory card.
8
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
Step2
1.
2.
Press and hold the
PUSH button and pull to
detach the bracket base.
Step1
Attach the device to the
bracket base. Turn and
tighten the car holder
and the bracket base to
make sure the device is
securely locked in place.
With the suction-cup
laying flat, position the
suction-cup on the
3.
4.
windshield.
Hold the base firmly on
the windshield and
press down the clamp
to mount the car holder
to the windshield. Make
sure the base is
securely locked in place.
5.
6.
Press and hold the
PUSH button and
connect the base to the
bracket.
Release the PUSH
button and make sure
the base is securely
locked in place.
9
2.2.2 Adjust Device Position
Knob
Knob
Rotate the knob to swivel
the device vertically.
Rotate the knob to swivel the
device horizontally up to 360°.
10
2.3 Connecting to Power
Use only the supplied car adapter to power up the device and
charge the built-in battery.
1. Connect one end of the car adapter to the USB connector of
the device.
2. Plug the other end of the car charger to the cigarette lighter
socket of your vehicle. Once the vehicle engine is started, the
device automatically turns on.
Note:
The orange LED lights up while the battery is charging.
Please take note if the environment temperature reaches 45°C or above, the car adapter still
can supply power to device, but it will not charge the Lithium-ion battery. This is the
characteristic of Lithium-ion and is not a malfunction.
11
2.4 Powering the Device On / Off
2.4.1 Auto Power On/Off
Once the vehicle engine is started, the device automatically turns on.
If the Automatic Record function is enabled, the recording will
automatically start right after the device turns on.
See Set Automatic Recording on page 13.
Once the vehicle engine shuts down, the device automatically saves
the recording and turns off the power within 10 seconds.
See Delay Shutdown on page 24.
2.4.2 Manual Power On/Off
To manually turn on the power, press the
POWER button.
To turn off, press and hold the POWER
button
for at least 2 seconds.
12
2.5 Initial Settings
Before using the device, we recommend you to enable the
Automatic Record function and set up the correct date and time.
2.5.1 Set Automatic Recording
To enable the recording to start automatically after you turn on the
power, do the following:
1. Press the
2. Press the
button to enter the OSD menu.
button to select
/
Automatic Record and press the
button.
3. Press the
/
button to select On
and press the
button.
4. Press the BACK button to exit the
menu.
2.5.2 Set the Date and Time
To set the correct date and time, do the following:
1. Press the
button to enter the OSD menu.
2. Press the
/
/
button to select Date / Time and press the
button.
3. Press the
button to adjust the
value and press the
button to
move to another field.
4. Repeat step 3 until the date and time
setting is complete.
13
3 Using the Car Recorder
3.1 Recording Videos
3.1.1 Record videos while driving
When the vehicle engine starts up and the Automatic Record
function is enabled, the device automatically turns on and starts
recording.
Recording will automatically stop when the engine is switched off.
Or, press the
button to stop recording manually.
Note:
On some cars, the recording will continue when the engine is switched off.
If this happens, do one of the following:
- Manually turn off the cigarette lighter.
- Remove the car adapter from the cigarette lighter.
3.1.2 Record all other types of videos
1. Press the
2. Press the
button to start recording.
button to stop recording.
Note:
One video file is saved for every 3 or 5 minutes of recording. See Using the Menu in page 22.
The device saves the recording in the memory card. If the memory card capacity is full, the
oldest file in the memory card is overwritten.
14
3.1.3 Emergency Recording
During video recording, press the
button to continuously record the video
in one file until the memory card storage
is full or the recording is manually
stopped.
To stop the recording, press the
button.
Note: If the Collision Detection function is enabled and a collision is detected, the device will
automatically trigger the emergency recording. See Using the Menu in page 22.
15
3.1.4 The Recording Screen
4
1
5
2
3
6
7
No.
Description
Item
1
Indicates the recording duration.
Duration
Indicates the current recording date
and time.
2
Date and time
Press the
menu.
button to enter the OSD
Guide icon
(Menu)
3
4
5
Indicates the remaining battery power.
Battery
Press the
recording.
button to stop the
Guide icon
(Stop)
Press the
record the video in one file until the
recording is manually stopped.
button to continuously
Guide icon
(Emergency)
6
7
Press the
Playback mode.
button to switch to
Guide icon
(Playback)
16
3.1.5 Using the LED Light
You can use the LED light to provide extra light when the lighting is
insufficient
.
To enable the LED light, do the following:
1. Press the
2. Press the
button to enter the OSD menu.
button to select
/
Auxiliary Light and press the
button.
3. Press the
/
button to select On
and press the
button.
4. Press the
menu.
button to exit the
Note:
Turn off LED lights when the battery is low.
When using LED lights for a long time, it may become hot. Take care not to touch the hot LED
lights.
3.1.6 Taking Snapshot
You can also use this device to take snapshots of the current scene.
From the standby screen, press the
button to take a snapshot.
Note: If recording is in progress, press the
button to stop the recording.
17
3.2 Playback Videos and Photos
1. If recording is in progress, press the
button to stop
recording. The standby screen is displayed.
2. Press the
3. Press the
button to enter the OSD menu.
button to select the
/
file category that you want to browse
and press the
button.
4. Press the
/
button to view the
next or the previous file and press
the
button to view the file in full
screen.
Note: From the standby screen, you can directly enter Playback mode by pressing
button.
The last recorded video is displayed on the screen.
18
3.2.1 Playing Videos
To play videos, do the following:
1. If recording is in progress, press the
recording.
button to stop
2. Press the
button to enter the OSD menu.
3. Press the
/
/
/
button to select File Playback and press the
button.
4. Press the
press the
button to select Video or Emergency and
button.
5. Press the
button to browse
for the desired video file and press
the button to play the video.
6. Press the button to pause the
playback. Press it again to resume.
3.2.2 Viewing Photos
To view photos, do the following:
1. If recording is in progress, press the
recording.
button to stop
2. Press the
button to enter the OSD menu.
3. Press the
/
/
/
button to select File Playback and press the
button.
4. Press the
button.
button to select Picture and press the
5. Press the
press the
button to browse for the desired photo file and
button to view the file in full screen.
19
3.2.3 The Playback Screen
Video Playback Screen
Photo Playback Screen
7
7
6
1
3
4
2
3
4
2
5
No.
Description
Indicates the recorded date and time.
Item
1
2
Date and time
Press the
button to return to file
Guide icon
(Back)
selection display.
Press the
previous video/photo.
button to view the
Guide icon
(Previous)
3
4
5
Press the
video/photo.
button to view the next
Guide icon
(Next)
Press the
video playback.
button to pause the
Guide icon
(Pause)
6
7
Indicates the elapse time.
Duration
Battery
Indicates the remaining battery power.
20
3.2.4 Deleting Files
To delete file(s), do the following:
1. If recording is in progress, press the
recording.
button to stop
2. Press the
button to enter the OSD menu.
3. Press the
/
button to select
File Deletion and press the
button.
4. Press the
/
button to select the
file category and press the
button.
5. Press the
/
button to select the
file that you want to delete and press
the
button to enter the Delete
menu.
6. Press the
/
button to select an option.
Item
Description
Delete the current file.
Delete One
Delete All
Delete all files.
7. Press the
button to confirm delete.
Note: Deleted files cannot be recovered. Ensure the files have backup before deletion.
21
4 Adjusting the Settings
4.1 Using the Menu
You can customize the video recording and other general settings
via the on-screen display (OSD) menus.
1. If recording is in progress, press the Record button to stop
recording.
2. Press the
button to open the OSD menu.
3. Press the
/
button to select a menu option and press the
button to enter the selected menu.
4. Press the
the
/
button to select the desired setting and press
button to confirm the setting.
5. Press the
button to exit the menu.
22
4.2 Menu Tree
Refer to the below table for details on menu items and available
menu options.
Menu
Description
Available option
option
Auxiliary
Light
Enable/Disable the LED light.
On / Off
File
Playback
Select the file category that
you want to view.
Video / Emergency /
Picture
Date / Time
Set the date and time.
Time Stamp Enable/Disable the date
stamp.
On / Off
Resolution
Set the video resolution.
1080P(1920x1080) /
720P(1280x720)
LCD Setting Set the duration for the
display to automatically turn
off right after video recording
starts.
On / Turn Off After 30
Sec. / Turn Off After 3
min. / Off
Voice
Record
Enable/Disable the voice
recording.
On / Off
Beep
Enable/Disable the beep.
On / Off
On / Off
Automatic
Record
Enable/Disable the device to
automatically record video
after the device is turned on.
Record
Interval
Set the recording duration for
each recorded video file.
3 mins / 5 mins
On / Off
Motion
Detection
Enable/Disable the motion
detection. If this function is
enabled and the device
detects any object movement,
it will automatically start the
recording.
23
Menu
option
Description
Available option
High Sensitivity /
Normal Sensitivity /
Low Sensitivity / off
Collision
Detection
Enable/Disable the collision
detection. If this function is
enabled and any collision is
detected, the device will
automatically trigger the
emergency recording.
Delay
Shutdown
Set the delay duration before
turning off the power.
10 Sec. / Off
Language
Set the on-screen display
menu language.
File Deletion Delete the file(s).
Video / Emergency /
Picture
TV standard Set the TV type based on
your local region.
NTSC / PAL
Format
Default
Format the memory card.
Yes / No
Yes / No
Reset all settings to factory
default settings.
24
5 Installing the Software
1. Place the attached CD ROM into the CD player.
2. If the CD does not execute automatically, please use Windows
File Manager to execute the Install_CD.exe file in the CD.
The following screen will be shown up.
3. Press the [Menu] item to start the installation process according
to the instructions on-screen.
25
6 Editing software
ArcSoft Total Media Extreme (TME) ™ manages your media for you,
and gives you tons of fun and exciting ways to create and share
projects featuring your photo, video, and music files. Edit, enhance
and add creative effects to your photos. You can
•
Create your own movies or photo slide shows complete with
soundtrack.
•
•
Upload your files easily to YouTube™!
Or share them through simple email attachments or popular
photo printing.
•
26
7
Specifications
Item
Image sensor
Description
1/3.2” CMOS sensor
2592 (H) x 1944 (V)
Effective pixels
Storage media
LCD display
Support Micro SDHC, up to 32GB class 4 or above
2.4” LCD color TFT (112K pixels)
Wide Angle Fixed Focus lens
F2.4, f=3.0mm
Lens
Focus range
1.5m~Infinity
Resolution: Full HD (1920 x 1080), 30fps
HD (1280 x 720), 30fps
Movie Clip
Format: .mov
Resolution: 5M (2592 x 1944)
Format: DCF (JPEG, Exif: 2.2)
Still image
(Snapshot)
Electronic shutter
Auto:1/2 ~1/2000 sec.
Shutter
G-Sensor
ISO
3-Axis G-Force sensor
Auto
Auto
Yes
Yes
Yes
White Balance
Assist Lamp
Microphone
Speaker
27
Item
Interface
Description
Mini USB, Mini C Type HDMI
Battery
Built-in 470mAH Li-polymer rechargeable
Operating
Temperature
0° ~ 50° C
Operating
Humidity
20 ~ 70% RH
-20° ~ 80° C
Storage
Temperature
Dimensions
Weight
67.8 x 62 x 30 mm
Approx. 85g
28
Copyright © 2012
All rights reserved.
All other marks, products or company names mentioned in this guide are
trademarks of their respective companies.
|